How to Calculate Your Electricity Bill in Pakistan (2026)

NEPRA uniform tariff · S.R.O. 279(I)/2026 · Updated 17 November 2026

Your electricity bill is not just "units × rate". The rate itself changes with how many units you use, and then fixed charges, fuel adjustments, duty and GST are added on top. That is why a bill can jump sharply from one month to the next even when your usage only rose a little. This guide shows the full calculation, step by step, with worked examples you can check in one minute.

Try it yourself: use the free Electricity Bill Calculator on Numblox — enter your units, consumer type and sanctioned load and it shows the estimated bill instantly, with every charge broken down.

The tariff table — residential (A-1), 2026

Pakistan uses one uniform residential tariff nationwide — the same rates apply for LESCO, IESCO, MEPCO, FESCO, GEPCO, PESCO, HESCO, SEPCO, QESCO and K-Electric (S.R.O. 279(I)/2026). The key difference is protected vs non-protected:

Units / monthProtected Rs/unitNon-protected Rs/unitFixed charge (non-protected, per kW)
1 – 10010.5422.44Rs 275
101 – 20013.0128.91Rs 300
201 – 300—33.10Rs 350
301 – 400—36.46Rs 400
401 – 500—38.95Rs 500
501 – 600—40.22Rs 675
601 – 700—41.85Rs 675
Above 700—47.20Rs 675

Protected consumers are those who used 200 units or less for the previous 6 months. Their rates are much lower — and telescopic, meaning the first 100 units are charged at Rs 10.54 and only the units above 100 at Rs 13.01. Non-protected consumers are charged one single rate on all units: the rate of the slab their total falls into. Protected consumers normally lose protected status above 200 units. Fixed charges for protected consumers are Rs 200 per kW up to 100 units and Rs 300 per kW for 101–200 units.

The full formula

For a non-protected consumer, the bill is:

Energy charges (units × slab rate) + fixed charge (fixed rate × sanctioned load in kW) + FCA + QTA (Rs per unit × units) + electricity duty 1.5% (on energy charges + FCA/QTA) + GST 18% (on energy + fixed + FCA/QTA + duty) + TV fee Rs 35.

FCA is the Fuel Charges Adjustment — it changes every month as fuel prices change, so always copy the FCA figure from your latest bill instead of guessing. QTA is the Quarterly Tariff Adjustment. In the worked examples below, FCA is Rs 2.37 and QTA is Rs 0.52 per unit (the calculator's current defaults), with a sanctioned load of 1 kW. If your FCA is different, your bill will differ by (your FCA − 2.37) × your units, plus duty and GST on that difference.

Worked examples — non-protected consumers

UnitsRate (Rs/unit)Energy chargesFixed + FCA/QTADuty + GST + TV feeEstimated total bill
10022.44Rs 2,244Rs 564Rs 585Rs 3,393
20028.91Rs 5,782Rs 878Rs 1,346Rs 8,006
30033.10Rs 9,930Rs 1,217Rs 2,233Rs 13,380
50038.95Rs 19,475Rs 1,945Rs 4,261Rs 25,681

Check the 300-unit example in full: energy 300 × Rs 33.10 = Rs 9,930; fixed charge Rs 350 × 1 kW = Rs 350; FCA + QTA (2.37 + 0.52) × 300 = Rs 867; duty 1.5% of (9,930 + 867) = Rs 162; GST 18% of (9,930 + 350 + 867 + 162) = Rs 2,036; plus TV fee Rs 35. Total: 9,930 + 350 + 867 + 162 + 2,036 + 35 = Rs 13,380. All four examples match the Numblox Electricity Bill Calculator exactly with the same inputs.

Worked examples — protected consumers

UnitsEnergy chargesEstimated total bill
100100 × Rs 10.54 = Rs 1,054Rs 1,880
200100 × Rs 10.54 + 100 × Rs 13.01 = Rs 2,355Rs 3,902

Compare: 200 units costs a protected consumer about Rs 3,902 but a non-protected consumer about Rs 8,006 — more than double. Protected status is worth a lot, which is why using more than 200 units for several months in a row is so expensive: you lose the protected rate and jump to the non-protected slab at the same time.

Why your bill jumps when you cross 200 units

Three things happen at once. First, the energy rate jumps from Rs 28.91 to Rs 33.10 per unit — and for a non-protected consumer that higher rate applies to all 201 units, not just the one unit above 200. Second, the fixed charge rises from Rs 300 to Rs 350 per kW. Third, FCA, duty and GST are all calculated on the bigger energy charge, so they rise too. Going from 200 to 201 units adds roughly Rs 1,106 to the bill (Rs 8,006 to about Rs 9,112), not roughly Rs 33. The same "whole-bill repricing" happens at every slab boundary (300, 400, 500 and so on), which is why a bill can rise sharply in a month when usage only rose a little.

How to read your own bill

Step 1 — Find your units. On your paper or online bill, look for "Units Consumed" or the difference between the current and previous meter readings. That is the number to enter in the calculator.

Step 2 — Check your consumer type. Your bill states whether you are protected or non-protected. If you used 200 units or less for the last 6 months, you should be protected — if the bill says otherwise, ask your DISCO.

Step 3 — Copy the FCA and your sanctioned load. Both are printed on the bill. FCA changes monthly; using last month's FCA for this month's estimate will be slightly off, so update it each month.

Step 4 — Compare. Enter the same figures in the Electricity Bill Calculator. If the calculator's estimate is close to your actual bill, you understand your bill. If it is far off, check whether arrears, meter rent, or extra taxes (for example, additional tax for non-filers) were added — those are not part of the standard calculation and the calculator does not include them.

Five ways to lower your next bill

1. Stay under 200 units if you are protected. Crossing 200 units can cost you protected status — the single biggest saving available to a small household.

2. Watch the slab boundary you are near. If you are at 290 units, the next 11 units push every unit into the Rs 36.46 slab. Shifting heavy use (washing, ironing, water pumping) to next month can be worth more than the units themselves.

3. Replace the biggest users first. Old fans, old fridges and inefficient air conditioners use far more units than lights and phone chargers. One efficient fan or an inverter AC saves units every single day.

4. Switch off standby loads. TVs, UPS systems and chargers left plugged in draw power all month. It is a small saving, but it is free.

5. Check your sanctioned load. Fixed charges are charged per kW of sanctioned load. If your sanctioned load is higher than you need, you pay more fixed charges every month — ask your DISCO whether it can be reduced.

Common questions

Why is my bill higher than the calculator estimate? The most common reasons are a different FCA that month, arrears from a previous bill, meter rent, or extra taxes that apply to non-filers. Check those lines on your bill first.

Do all DISCOs charge the same rates? Yes — the residential tariff is uniform nationwide under S.R.O. 279(I)/2026, so LESCO, IESCO, MEPCO, FESCO, GEPCO, PESCO, HESCO, SEPCO, QESCO and K-Electric all use the same slab rates. FCA can differ slightly by DISCO and month.

Is GST charged on the whole bill? GST at 18% is charged on energy charges plus fixed charges plus FCA/QTA plus electricity duty — not on the TV fee. That is why the tax part of the bill is larger than 18% of the energy charges alone.

What if I use very few units? Very low-use lifeline categories have separate lower rates. If your bill says "lifeline", this standard calculation may not match it — use the calculator's protected rate as a rough guide and rely on the bill itself.

Check your own bill

Enter your units in the Numblox Electricity Bill Calculator and compare the result with the table above. If the two disagree, the table is the one to trust — and please tell us, so we can fix the calculator.

Disclaimer: This article is an estimate for general guidance only. Your final bill is determined by your DISCO, the FCA notified for that billing month, and your individual circumstances (arrears, meter rent, additional taxes). The official bill is final.

Related: Pakistan Salary Tax Slabs 2026-27 · Salary Tax Calculator · All free calculators